# Bollinger BandWidth

## Introduction

Bollinger BandWidth is an indicator derived from Bollinger Bands. In his book, Bollinger on Bollinger Bands, John Bollinger refers to Bollinger BandWidth as one of two indicators that can be derived from Bollinger Bands. The other indicator is %B.

BandWidth measures the percentage difference between the upper band and the lower band. BandWidth decreases as Bollinger Bands narrow and increases as Bollinger Bands widen. Because Bollinger Bands are based on the standard deviation, falling BandWidth reflects decreasing volatility and rising BandWidth reflects increasing volatility.

## SharpCharts Calculation

```( (Upper Band - Lower Band) / Middle Band) * 100
```

Bollinger Bands consist of a middle band with two outer bands. The middle band is a simple moving average usually set at 20 periods. The outer bands are usually set 2 standard deviations above and below the middle band. Settings can be adjusted to suit the characteristics of particular securities or trading styles.

When calculating BandWidth, the first step is to subtract the value of the lower band from the value of the upper band. This shows the absolute difference. This difference is then divided by the middle band, which normalizes the value. This normalized Bandwidth can then be compared across different timeframes or with the BandWidth values for other securities.

The chart above shows the Nasdaq 100 ETF (QQQ) with Bollinger Bands, BandWidth, and the Standard Deviation. Notice how BandWidth tracks the Standard Deviation (volatility). Both rise and fall together. The image below shows a spreadsheet with a calculation example.

## Defining Narrowness

Narrow BandWidth is relative. BandWidth values should be gauged relative to prior BandWidth values over a period of time. It is important to get a good look-back period to define BandWidth range for a particular ETF, index or stock. For example, an eight to twelve-month chart will show BandWidth highs and lows over a significant timeframe. BandWidth is considered narrow as it approaches the lows of this range and wide as it approaches the high end.

Securities with low volatility will have lower BandWidth values than securities with high volatility. For example, the Utilities SPDR (XLU) represents utility stocks, which have relatively low volatility. The Technology SPDR (XLK) represents technology stocks, which have relatively high volatilities. Because of lower volatility, XLU will have consistently lower BandWidth values than XLK. The 200-day moving average of XLU BandWidth is below 5, while the 200-day moving average of XLK BandWidth is above 7.

## Signal: The Squeeze

Bollinger BandWidth is best known for identifying The Squeeze. This occurs when volatility falls to a very low level, as evidenced by the narrowing bands. The upper and lower bands are based on the standard deviation, which is a measure of volatility. The bands narrow as price flattens or moves within a relatively narrow range. The theory is that periods of low volatility are followed by periods of high volatility. Relatively narrow BandWidth (a.k.a. the Squeeze) can foreshadow a significant advance or decline. After a Squeeze, a price surge and subsequent band break signal the start of a new move. A new advance starts with a Squeeze and subsequent break above the upper band. A new decline starts with a Squeeze and subsequent break below the lower band.

Chart 2 shows Alaska Airlines (ALK) with a squeeze in mid-June. After declining in April-May, ALK stabilized in early June as Bollinger Bands narrowed. BandWidth dipped below 10 to put the Squeeze play on in mid-June. Keep in mind that 10 refers to 10%. In other words, the width of the bands is equal to 10% of the middle band. Even though this level seems high, it is actually quite low for ALK. With the stock around 15-16, BandWidth was less than 10% and at its lowest level in over a year. With the subsequent surge above the upper band, the stock broke out to trigger an extended advance.

Chart 3 shows Aeropostale (ARO) with a couple of Squeezes. A horizontal line was added to the indicator window. This line marks 8, which is deemed relatively low based on the historical range. The BandWidth indicator alerted traders to be ready for a move in mid-August. The stock obliged with a surge above the upper band and continued higher throughout September. The advance stalled in late September and BandWidth narrowed again in October. Notice how BandWidth declined below the lows set in August and then flattened out. The subsequent break below the lower Bollinger Band triggered a bearish signal in late October.

The Squeeze can also be applied to weekly charts or longer timeframes. Volatility and BandWidth are typically higher on the weekly timeframe than a daily timeframe. This makes sense because larger price movements can be expected over longer timeframes. Chart 4 shows Barrick Gold (ABX) consolidating throughout 2006 and into 2007. As the consolidation narrowed and a triangle formed, Bollinger Bands contracted and BandWidth dipped below 10 in January 2007. Notice how BandWidth remained at low levels as the consolidation extended. A bullish signal triggered with the breakout in July 2007. BandWidth also rose as prices moved sharply in one direction and Bollinger Bands widened.

Chart 5 shows Honeywell (HON) with an extended trading range in the 50-55 area. There was a move to the upper band in May, but no breakout for a signal. Instead, HON clearly broke below the lower band to trigger a bearish signal in June 2007.

## Summary

The BandWidth indicator can be used to identify the Bollinger Band Squeeze. This alerts chartists to prepare for a move, but direction depends on the subsequent band break. A squeeze followed by a break above the upper band is bullish, while a squeeze followed by a break below the lower band is bearish. Be careful of head-fakes however. Sometimes the first break fails to hold as prices reverse the other way. Strong breaks hold and seldom look back. An upside breakout followed by an immediate pullback should serve as a warning.

## Using with SharpCharts

Bollinger BandWidth can be found in the indicator list on SharpCharts. The default parameters (20,2) are based on the default parameters for Bollinger Bands. These can be changed accordingly. 20 represents the simple moving average. 2 represents the number of standard deviations for the upper and lower band. BandWidth can be positioned above, below or behind the price plot. Click here to see a live example of BandWidth.

## Using with MarketCarpets

Normalized Bollinger BandWidth is shown in the Market Carpet and this allows users to compare BandWidth for a number of securities. Using the S&P Sector MarketCarpet as an example, choose Bollinger BandWidth and then click the delta icon (little triangle) to view absolute levels. A shaded delta icon shows percentage change. A white delta icon shows absolute levels. Green boxes show stocks with relatively wide BandWidth. Light boxes show stocks with relatively narrow BandWidth. A list of the stocks with the narrowest BandWidth is shown at the bottom right of the Market Carpet (Bottom 5). Click the names to see a small chart above. Users can dive into the sectors by clicking on the sector heading (e.g. Technology). With nine sectors and the Bottom 5 stocks listed for each sector, users can quickly view 45 stocks with relatively narrow BandWidth.

## Suggested Scans

### Bollinger Band Breakout

This scan reveals stocks whose Bollinger Bands just expanded rapidly after being contracted for 5 or more days.

```[type = stock] AND [country = US]
AND [Daily SMA(20,Daily Volume) > 40000]
AND [Daily SMA(60,Daily Close) > 20]

AND [Daily BB Width(20,2) > Yesterday's max(5, BB Width(20,2)) * 2]```

For more details on the syntax to use for BandWidth scans, please see our Scanning Indicator Reference in the Support Center.